In a renovation you often want the look of stone or travertine, but without heavy slabs, without chopping off old tiles, and without cutting stone around corners. Elastone flexible mineral panels are made for that kind of work: a thin, bendable sheet 60×280 cm, €79 each, glued to an even, load-bearing substrate — including stable old tiles. This article is about typical renovation situations: straight walls, arches, columns and niches. Composition, series and the full figures are in the guide Flexible mineral wall panels: what they are and how they differ from PVC. More on the travertine look itself is in Flexible travertine wall panels: the Elastone collection.
Why this format suits a renovation
A solid stone slab needs load-bearing capacity that an old wall often does not have, and is hard to take around an arch. Elastone is not solid stone: according to the product pages, the sheet is made from finely ground minerals and a flexible polymer binder, cured without firing. That is why the panel is thin — 3, 5 or 8 mm, depending on the series — and can be bent. The weights in the shop are estimates only; we do not repeat the figures here, because they are not an independent weighing. What matters in a renovation is something else: the 60×280 cm format covers a wall up to a typical room height with no horizontal joints, and the polymer adhesive goes over the full surface, including stable old tiles.
That is a different path from stripping tiles and re-plastering, and different from rigid PVC wall panels of 280×122 cm. PVC covers a large, straight surface well, including wet rooms, but it does not bend around an arch. Elastone has no click system — in the Dizzplace range only SPC has a click joint — and is not cheaper per square metre than typical PVC. Its place in a renovation is precisely the curve, the niche, and a stone texture you can feel. The price comparison of the lines is in How much do PVC wall panels cost per m²?.

Gluing over old tiles
The product pages allow plaster, concrete, plasterboard and old tiles, if the substrate is even, load-bearing, clean and dry. A flexible panel will follow unevenness, so the wall really has to be flat. Spread polymer adhesive over the full surface with a 3–4 mm notched trowel. Do not spot-glue. According to the product pages, about one cartridge of polymer mounting adhesive, 600 ml (€9.90) is enough for one panel. Leave the panels in the room for 24 hours. Work at about +10…+25 °C. At the 280 cm format the shop recommends two people.
So you do not automatically have to strip the old covering — but you also cannot hide a crooked wall under a thin panel. If tiles are loose, greasy, or the grout leaves a step, even out the substrate first. General glue-down rules are also in the step-by-step installation guide.
Arches, columns, niches and corners
This is where the bendable format differs from a rigid sheet. Around arches, bend slowly and support the panel until the adhesive sets. According to the product page, 3 mm Travertine panels suit arches and half-columns with a radius from about 30 cm; that is a shop figure, not an independent measurement. The 5 mm (Temple Line) and 8 mm (Ancient Stone) series need a larger radius — there is no number in the shop, so we do not invent one. On a tight curve, stay with the 3 mm series, or test on a sample before you order full sheets.


You cannot wrap a sharp 90° corner with one panel. Cut two pieces and butt-joint them, or finish with a profile. In the Dizzplace showroom you can see such a joint, temporarily held with tape — that is not a bend around the edge, but the meeting of two cut edges. In a niche, exact measuring and spare for cuts matter. One panel is 60 cm wide and 280 cm high; divide the wall width by 0.6 m and add spare: 5–10% on straight walls, 10–15% on curves. You can send measurements via the project quote page — we reply within 48 hours.
Which series to choose for a renovation
The flexible stone wall panel collection has 12 designs, all 60×280 cm, all €79 (about €47 per m²). The choice depends on whether you want calm stone or a clear relief, and on how tight the curve is.
- Elastone Travertine TF1–TF8, 3 mm, the easiest to bend. TF4 is warm beige with rust-coloured veins, often chosen for a living room or hallway.
- Temple Line White and Off-white, 5 mm, fine lines — a calmer rhythm than deep ribs.
- Ancient Stone White and Off-white, 8 mm, deep ribs. On a very tight arch they are harder to work than 3 mm.

Colour on a screen can differ from the real panel. Before a larger order, a 20×20 cm sample for €5 is worthwhile, for example the TF4 sample, from the sample collection. Cutting: 3 mm with a knife or shears; 5 and 8 mm with a saw or a grinder with a diamond disc.
Where this renovation has limits
The product pages allow living rooms, bedrooms, kitchens, hallways, columns, arches and niches, and a fireplace surround with a distance from an open flame. Outdoor walls are mentioned, but discuss a specific outdoor project first: rain, sun and temperature swings are different conditions from a dry indoor wall.
In a bathroom the product pages allow use outside the zone of a direct water jet. We do not promise shower use here. If you want to cover a shower zone without chopping off tiles, waterproof PVC sheets are a better fit — see Bathroom renovation without tiling and PVC wall panels in the shower. These panels are not for floors.
Clean with warm water and a soft cloth. No solvents, acetone, acids, descalers or abrasive cleaners. We deliver ourselves in the Netherlands (within 200 km of Valkenswaard), Belgium (within 100 km of Schelle) and Germany (within 100 km of Dortmund), always for €49. Adhesive travels only together with panels. Outside the zone you can collect in Valkenswaard, John F. Kennedylaan 40, by appointment, via the contact page. We do not quote a fixed hourly rate for installation by us here.
Frequently asked questions about renovation
Do I have to chop off old tiles?
No, if they are stable, even, clean and dry. Full-surface adhesive, 3–4 mm notched trowel.
Does this replace a heavy stone slab on an arch?
The panel gives the look and feel of stone and can be bent, but it is not solid stone. On tight arches stay with the 3 mm series; for 5 and 8 mm the shop does not give a radius figure.
Can I wrap a 90° corner with one piece?
No. Cut and butt-joint, or use a profile.
Can I cover a shower wall with them?
The product pages allow bathroom use outside the zone of a direct water jet. We do not promise shower use here.
How many panels should I order?
Divide the wall width by 0.6 m and add 5–10% spare on straight walls, 10–15% on curves. Or send measurements via the quote page.
How do I start before buying full sheets?
Order a 20×20 cm sample for €5, then panels from the Elastone collection.







